XPEL Automotive Window Film
PRIME XR ™
Extreme Performance, Exceptional Quality
Utilizing a nano-ceramic construction, PRIME XR ™ maintains the same flawless appearance and clarity throughout the years. Blocking up to 88% infrared heat rejection, PRIME XR will provide you with the level of performance you expect from a top-of-the line film without breaking the bank.
The Skin Cancer Foundation recommends PRIME XR ™ Window Tint as an effective UV protectant.
Ceramic Particle Technology
Contains a proprietary blend of ceramic particles to act as a solid barrier to infrared heat while maintaining the ease of install in a 1.5 mil construction.
Superior Heat Rejection
Our ceramic particle technology blocks the vast majority of the sun’s heat-causing infrared radiation — keeping your interior cool and improving fuel efficiency.
UV Ray Protection
PRIME XR provides SPF 1,000 protection that effectively blocks over 99% of harmful Ultraviolet rays that can lead to numerous skin cancers, premature aging and skin cell damage.
Greater Clarity
In the past, keeping cool meant darker shades. The ceramic technology in PRIME XR allows us to provide the highest performance without sacrificing clarity and color.
Crystal Clear Signal
Our nano-ceramic particle technology does not interfere with radio, cellular, and Bluetooth signals like traditional metallized films.
Frequently
Asked
Questions
Depending on the vehicle, average time for us is about 3 hours.
We use a Roland cutting system that cuts out the film according to specific make model and year. We sometimes cut it out custom on certain vehicles depending on client preference.
Very common question believe it or not. The film is first shaped (shrank) on the outside then installed on the inside.
It’s ok to wash your car right after the film is installed, but we ask that you do not clean inside of the windows for the first week. We clean them prior to installation as well.
Depending on the temperature, and film type, curing time varies. Automotive films should be fully cured from 7-14 days. Commercial and residential films cure anywhere from 30-90 days depending on exposure and temperature. Most of the moisture will be visible from the inside looking out.
We ask that you keep the windows rolled up for at least 24 hours while the film cures.
We recommend using any glass cleaner that has no ammonia, or abrasives. A soft cotton cloth or diaper material is always recommended.
There is no film that is scratch proof, but all of our films are scratch resistant and have patented scratch coats on them.