Prestige Automotive Window Film

Spectra PhotoSync IRD

Automotive Window Film

Spectra PhotoSync IRD

The most advanced technology in automotive window film comes in our Spectra PhotoSync IRD® Series. Utilizing our patent-pending nano technology, our lines of window films block out more solar radiation than any other film on the market. Achieving IRR (infrared radiation rejection) upwards of 99% through 2200nm, there is no other window tint manufacturer that is able to achieve this.  Total Solar Energy rejection achieved is up to 80% and yet able to retain maximum visibility.


Extreme climates can significantly affect the range in your electric car.  When it is hot, you turn up your AC.  When it is cold, you turn up the heater.  Both can zap the range of your electric car by 5%.  Spectra Photosync IRD® will reduce cabin temperatures in the summer time; thus, allowing for the AC use to be reduced.  During winter months, cold temperatures can cause a range reduction by 35%-40%.  With Spectra Photosync’s heat retention technology, you will retain more heat and use less of your heater to keep the cabin warmer.


The solar spectrum consists of 3 main properties: Ultraviolet, Visible light, and Infrared Rays (IR). IR accounts for 53% of the spectrum, so PhotoSync’s® high 99% IR rejection rate serves as a constant measure of product performance. The technological advances of Prestige’s coatings allows for high performance of Spectra PhotoSync IRD® without the use of any metallics, which means no interference of wireless transmission signals (e.g. GPS, cell signals, radio waves, keyless entry systems, satellite, etc.). PhotoSync® will continuously produce up to 99% IR rejection between 950nm-2200nm and guaranteed to not lose its performance over time.


Spectra PhotoSync®, also rejects 99.5% of ultraviolet rays (both UVA and UVB), which means occupants and the interior components of your vehicle are protected from harmful UV rays.

Choose your level of protection

The Spectra PhotoSync IRD Series is available in a variety of tint levels to meet your needs.

VLT 70% 55% 45% 30% 15%
UV Block 99.5% 99.5% 99.5% 99.5% 81%
SHGC 0.38 0.32 0.26 0.20 0.19
Total Solar Energy Rejected (TSER) 62% 68% 74% 80% 81%
Infrared Rejected (IRR) 98% 98% 98% 99% 99%


Depending on the vehicle, average time for us is about 3 hours.

We use a Roland cutting system that cuts out the film according to specific make model and year. We sometimes cut it out custom on certain vehicles depending on client preference.

Very common question believe it or not. The film is first shaped (shrank) on the outside then installed on the inside.

It’s ok to wash your car right after the film is installed, but we ask that you do not clean inside of the windows for the first week. We clean them prior to installation as well.

Depending on the temperature, and film type, curing time varies. Automotive films should be fully cured from 7-14 days. Commercial and residential films cure anywhere from 30-90 days depending on exposure and temperature. Most of the moisture will be visible from the inside looking out.

We ask that you keep the windows rolled up for at least 24 hours while the film cures.

We recommend using any glass cleaner that has no ammonia, or abrasives. A soft cotton cloth or diaper material is always recommended.

There is no film that is scratch proof, but all of our films are scratch resistant and have patented scratch coats on them.


With over 20 years experience your vehicle will be tinted professionally and with the proper film for your needs.


Practically invisible, this durable film protects any vehicle from nicks, chips, abrasions and scuffs.


Change the look of your UTV or vehicle while maintaining its original color for resale or when your requirements change.


Implementing window film at your commercial property has many advantages both aesthetically and environmentally.


Installing window film on your home can serve many useful purposes, most notably how much it can save you money.


Call Us Today:

(480) 248-8966